Wires & Cables
Cables are engineered for the most demanding applications to offer the highest-in-class performance. SS Enterprises distributes and provides Radiall, TE Connectivity & SS Impex make wires and cables.
SS Enterprises distributes & provides Radiall, TE Connectivity and SS Impex make cables and cable assemblies. These cables and cable assemblies incorporate the latest materials science to meet rigorous electrical, mechanical, and environmental requirements. Cables are engineered for the most demanding applications to offer the highest-in-class performance. They are valued in multiple industries for delivering signal integrity, speed, and mechanical robustness in the harshest environments.
We provide Cables and Cable Assemblies for systems operating on land, underground, in the ocean, air or space.
-
PTFE Hook Up wire for defense applications.
-
Coaxial & Microwave / RF Cable Assemblies.
-
Fiber Optic Cable.
-
Ethernet Cables for defense applications.
-
CAN Bus Cables for defense applications.
-
Shielded Twisted Pair Cables for defense applications.
-
Power Cable.
PTFE HOOK UP WIRE
Download PTFE Wire Datasheet
PTFE Hook Up Wire for Defense application.
(Qualifying To MIL-W-16878, And JSS-51034 Specification)
Standard products meet the following MIL Standards & approvals: -
• MIL-W-16878 (Type ET, 250 volts)
• MIL-W-16878 (Type E, 600 volts)
• MIL-W-16878 (Type EE, 1000 volts)
• LCSO (Electronic Components Standardization Organization, Ministry of Defense, and India)
Wire Construction
• Conductor :Silver or Nickel or Tinned Plated Copper or Bare Copper Wire.
• Insulation :PTFE Wrap
• Properties :Resistance to Fire, Chemicals, Acids, Sunlight and Moisture.
• Voltage Grade :250 V, 600 V or 1000 V and above as per customer requirement.
• Temperature :-65° C to + 260° C
• Size :AWG 32 to AWG 1 and ( AWG 0 to AWG 0000 on request only )
COAXIAL & MICROWAVE / RF CABLE ASSEMBLIES
Coaxial & Microwave / RF Cable Assemblies.
Radiall Microwave/RF Assemblies, is engineered precisely to prevent the ingress of water vapor, fuel, and other hazardous contaminants. They routinely maintain low insertion/return loss and excellent phase stability at frequencies up to 40 gigahertz (GHz). Not only that, our robust assemblies provide outstanding shielding effectiveness against electromagnetic interference that can compromise signal integrity and reduce the quality of signal transmission.
Properties:
-
Maximum Frequency Range (GHz): 2.0 — 40.0
-
Standard Impedance (ohms): 50 ± 1
-
Velocity of Propagation (nominal) (%): 85
-
Time Delay (nominal) [ns/m (ns/ft)]: 3.94 (1.20)
-
Capacitance [pF/m (pF/ft)]: 85.3 (26.0)
-
Dielectric Constant (Nominal):1.4
-
Dielectric Withstanding Voltage (Vrms)
Conductor-to-Conductor:1500
Conductor-to-Shield:1500 -
Shielding Effectiveness (dB to Max Frequency): > 90
-
Jacket Material: Engineered Fluoropolymer
-
Jacket Color: Black and Green
-
Conductor: Silver-Plated Copper / SPC Clad Aluminum
-
Dielectric Material: PTFE
-
Crush Resistance (kgf/cm [lb/in]): 8.95 (50.0)
-
Temperature Range (°C): -58 to +200
FIBRE OPTIC CABLE
Fiber Optic Cable.
With data rates continuing to rise, fiber optic cables must be able to reliably transfer large amounts of data in a split second between mission systems so we can maintain communications.
TE Connectivity single- and multi-mode fiber optic cables are also smaller and lighter weight without sacrificing mechanical strength. Plus, they're more flexible with tighter bending capability and won't break or fail during routing in cramped areas.
1.8mm Fiber Optic Cable is engineered to perform reliably in a variety of ground applications.
Properties:
-
Maximum Optical Loss at 850 nm (dB/km): ≤ 4.0
-
Maximum Optical Loss at 1310 nm (dB/km): ≤ 3.0
-
PFAJacket Material:
-
Single-Mode or Multi-ModeCore Type:
-
High-Temperature AcrylateCoating Type:
-
PTFEBuffer Type:
-
Temperature Range (°C): -55 to +135
1.2mm Fiber Optic Cable are single-/multi-mode fiber optic cables delivering stable optical performance for high data rate transfer in the most demanding operational conditions.
Properties:
-
Maximum Optical Loss at 1310 nm (dB/km): Single (≤ 0.7) / Multi-mode (≤ 1.5)
-
Jacket Material: FEP
-
Core Type: Single Mode & Multi Mode
-
Coating Type: Polyimide
-
Buffer Type: PTFE
-
Temperature Range (°C):-65 to +200
ETHERNET CABLES
Ethernet Cables
With the demand of faster digital networks with increased performance, cables need to provide more reliable signal integrity and transfer data at higher speeds to ensure critical Intel is received in real time. Also, the industry is moving away from proprietary networks to open-source architectures and standardized protocols, like Ethernet.
Ethernet Cables provide system architects and engineers with many benefits that improve electrical and mechanical performance such as:
-
excellent signal integrity for high-speed data transmission up to 10 gigabits (Gb/s).
-
exceed electrical requirements for Cat6a protocol.
-
less RF interference at higher frequencies with proven EMI shielding performance.
-
proven lower signal attenuation and reduced crosstalk before/after installation.
-
robust construction tolerates harsh conditions, like fluctuating temperatures and rigorous installation.
-
significant weight savings with compact design that is 24% smaller and 25% lighter.
-
less need for additional signal amplification, further reducing weight/power requirements.
-
easier routing in tight spaces due to greater flexibility and tighter bend radius.
Properties:
-
Standard Impedance (ohms):100 ± 10
-
Typical Operating Voltage: < 15
-
Velocity of Propagation (nominal) (%): 80
-
Time Delay (nominal) [ns/m (ns/ft)]: 4.10 (1.25)
-
Capacitance [pF/m (pF/ft)]: 42.6 (13.0)
-
Dielectric Withstanding Voltage (Vrms)
Conductor-to-Conductor: 1500
Conductor-to-Shield : 1000 -
Jacket Material: Engineered Fluoropolymer
-
Jacket Color: Grey
-
Conductor: Silver-Plated Copper or Silver-Plated Copper Alloy
-
Conductor Color-Coding:
Solid Blue/White with Blue Stripe
Solid Orange/White with Orange Stripe
Solid Green/White with Green Stripe
Solid Brown/White with Brown Stripe -
Dielectric Material ePTFE/PTFE
-
Temperature Range (°C) -65 to +200
CAN BUS CABLES
CAN Bus Cables
Controlled-impedance cables meet the defense sector’s continuing high data communications needs in a compact, lightweight and flexible footprint. CAN Bus Cables enable high-quality signals for fast data transmission up to 1 gigahertz (GHz) in demanding conditions.
Properties:
-
Standard Impedance (ohms):120 ± 10
-
Typical Operating Voltage:< 15
-
Velocity of Propagation (nominal) (%):80
-
Time Delay (nominal) [ns/m (ns/ft)]:4.10 (1.25)
-
Capacitance [pF/m (pF/ft)]:42.0 (12.8)
-
Dielectric Withstanding Voltage (Vrms)
Conductor-to-Conductor: 1500
Conductor-to-Shield: 1000 -
Jacket Materials: Engineered Fluoropolymer
-
Jacket Color: Grey
-
Conductor: Silver-Plated Copper or SPC Alloy (Cadmium-Free)
-
Conductor Color-Coding: Blue and White
-
Dielectric Material: ePTFE/PTFE
-
Temperature Range (°C): -55 to +200
SHIELDED TWISTED PAIR CABLES
Shielded Twisted Pair Cables
Cables must be able to transfer critical data at higher speeds while maintaining stable communications on mobile networks to ensure the operation and soldiers are never at risk. Cables also need to boost power and deliver dependable signal integrity in a smaller space. TE Connectivity Shielded Twisted Pair Cables deliver excellent signal integrity for high-speed data transmission up to 1 gigahertz (GHz) no matter the environmental conditions.
-
excellent signal integrity for high-speed data transmission up to 1 gigahertz (GHz)
-
higher tolerance against rough environments, like changing climate zones and rigorous routing
-
low-profile design that is 18% smaller and up to 50% lighter compared to standard cables
-
less need for additional signal amplification, further reducing weight/power requirements
-
highly flexible with a tighter bend radius for easier installation in hard-to-reach places
Properties:
-
Standard Impedance (ohms):100 ± 10
-
Typical Operating Voltage:< 15
-
Velocity of Propagation (nominal) (%):80
-
Time Delay (nominal) [ns/m (ns/ft)]:4.07 (1.24)
-
Capacitance [pF/m (pF/ft)]:42.6 (13.0)
-
Dielectric Withstanding Voltage (Vrms)
Conductor-to-Conductor: 1500
Conductor-to-Shield: 1000 -
Jacket Materials: Engineered Fluoropolymer
-
Jacket Color: Grey
-
Conductor: Silver-Plated Copper or SPC Alloy (Cadmium-Free)
-
Conductor Color-Coding: Blue and White
-
Dielectric Material: ePTFE/PTFE
-
Temperature Range (°C): -55 to +200
POWER CABLE
Power Cable
TE’s range of flexible power cables are designed to be bent and routed in extremely tight areas with no wrinkling or cracking of the insulation, and which help meet the harshest application requirements.
High-performance wire options. The need for a combination of high-temperature and high-performance in wire insulation has become a critical factor in today’s platforms. TE’s new highly flexible wires, the SHF-260 and FDR25S, provide an exceptional range of properties such as reducing the stress on the contact, and reducing the mating and de-mating forces normally associated with large-shell diameter circular connectors.
SHF260
-
All extruded fluoropolymer based insulation system.
-
Outstanding chemical and fluid resistance when tested to SAE-AS-22759/41.
-
Corona resistant when tested to ASTM D1868.
-
Arc track resistant to the current SAE-AS-22759 specification.
FDR25S
-
Highly flexible small bend radius allows for fitting into complex routing
-
Extruded polymer notch and abrasion resistant — mechanically tough
-
Vibration stability helps support a long life cycle in engine compartments
Post a question to our experts to know more about our wires and cables offerings.
